Supermicro X10DAi 2xLGA2011-3, iC612 16x DDR4 ECC,10xSATA3,(PCI-E 3.0/3,2(x16,x8)PCI-E 2.0/1(x4),Audio,2x LAN,IPMI

Product SKUs

MBD-X10DAi -B
X10DAi (Bulk Pack)

Physical Stats

Form Factor
E-ATX
Dimensions
12" x 13" (30.5cm x 33.0cm)

Processor/Cache

CPU
Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP **)
Dual Socket R3 (LGA 2011)
Cores / Cache
Up to 18 Cores / Up to 45MB Cache
System Bus
QPI up to 9.6 GT/s
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.

System Memory

Memory Capacity
16x 288-pin DDR4 DIMM sockets
Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type
2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
Memory Voltage
1.2 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset
Intel® C612 Express chipset
SATA
SATA3 (6Gbps); RAID 0, 1, 5, 10
Network Controllers
Intel® i210 Dual Port Gigabit Ethernet
Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio
RealTek ALC888 7.1 High Definition Audio with S/PDIF header

Input / Output

SATA
10x SATA3 (6Gbps) ports
LAN
2x RJ45 Gigabit Ethernet LAN ports
USB
6x USB 3.0 ports (4 rear + 2 via header)
5x USB 2.0 ports (2 rear + 2 via header + 1 Type A)
Audio
7.1 HD Audio with optical S/PDIF
Serial Port / Header
2x COM Ports (1 rear, 1 header)
DOM
2x SuperDOM (Disk on Module) ports
TPM
1x TPM 1.2 20-pin Header


SuperServer(s) with X10DAi

Model(s)
SYS-7038A-I
SYS-7048A-T


Expansion Slots

PCI-Express
3 PCI-E 3.0 x16
2 PCI-E 3.0 x8
1 PCI-E 2.0 x4 (in x8)

System BIOS

BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1

Management

Software
NMI
SuperDoctor® 5
Watch Dog
Power Configurations
ACPI / APM Power Management
Power-on mode for AC power recovery

PC Health Monitoring

Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
5+1 Phase-switching voltage regulator
FAN
8x 4-pin fan headers (up to 8 fans)
8x fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
RoHS


Operating Environment

Operating Temperature Range
10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)