QNAP™QM2 series, 2 x PCIe 2280 M.2 SSD slots, PCIe Gen2 x 4 , 1 x AQC107S 10GbE NBASE-T port 

M2-2P10G1TA
Controller Aquantia AQC107
Connector 2 x M.2 2280 PCIe (Gen2 x 2) NVMe SSD slots; 1x 10GBASE-T port
PCIe and Lanes PCIe Gen2 x 4
Transmission Rates 10G/ 5G/ 2.5G/ 1G/ 100M
Bracket Low-profile (default). Low-profile flat and Full-height brackets are also included.
Dimensions (L x W x H) 157 × 68.9 × 20.6 mm
Cable RJ-45; over CAT-6 class cable
Note [NAS] Recommended models (please update your NAS to latest version)

Note: The TS-x77 and TVS-x82(T) series only supports installing the QM2 in the System Zone PCIe slot (PCIe slot 1).

Please check the M.2 SSD compatibility list and QM2 Installation Guide
Note [PC] Note:
The system BIOS and Operating System (OS) must be capable of supporting a PCIe NVMe SSD. Please refer to the technical manual of your system or consult with the vendor.
Windows devices: The driver for the Aquantia® AQC107 is required. Click here to download drivers
Linux: Supports Linux core 3.10, 3.12, 3.2, 4.2, and 4.4. The driver for the Aquantia® AQC107 is required. Click here to download drivers
QNAP NAS: Please update your NAS to the latest QTS version
Architecture Diagram architecture_diagram_qm2
Note: Use only QNAP memory modules to maintain system p