Kingston/ DDR3L/ 8GB/ 1600MHz/ CL11/ 2x4GB

Typ paměti: DDR3L
Kapacita paměti: 8 GB

Frekvence paměti: 1600 MHz
Časování: 11
Korekce chyb (ECC): Ne

Funkce:
*JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
*VDDQ = 1.5V (1.425V ~ 1.575V)
*667MHz fCK for 1333Mb/sec/pin
*8 independent internal bank
*Programmable CAS Latency: 9, 8, 7, 6
*Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
*Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
*8-bit pre-fetch
*Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
* Bi-directional Differential Data Strobe
* Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
* On Die Termination using ODT pin
* Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
* Asynchronous Reset
* PCB: Height 1.18” (30mm), single sided component

Počet modulů v balení: 2 x 4 GB
Kingston/ DDR3L/ 8GB/ 1600MHz/ CL11/ 2x4GB

Parametre